72MHz receiver crystal UM-1

brush set DC5-2.4 motor

instructions included

Dual charger 10mA to 150mA

The Didel/Plantraco BiCha charges one or two LiPo cells automatically and is compatible with Bahoma, Plantraco 5mm or 10mm, Didel Bapi or Bami systems.
You may also add your own connector.
Charge current is adjustable from 10mA to 150 mAh. Power is provided by a built-in battery holder for four AA alkaline or NiMH cells, or you can use a 6 VDC wall transformer (not supplied).

Dual Parkzone Li-poly charger

Details 

Inexpensive wall plug-in dual ParkZone and Blade MCX charger. Charges 2 cells simultaneously. Independent LED indicator lights for charge status. 120 VAC input

Futaba 27MHz plug-in transmitter crystal

Details 

In stock:
(2) ch 02
(3) ch 04

JS-3 joystick

Includes two 5k pots
Ideal for scratch-built transmitters.
All-Electronics Corp. #JS-3

LED green 10cd T1 3/4

Details 

3.58V @ 23.7mA
weight: 0.27g
brightness: 10cd
diameter: 5mm

LED red 15cd jumbo

Details 

2.12V @ 45mA
weight: 1.3g
brightness: 15cd
diameter: 10mm

LED white 0.30g T1 3/4

Details 

2.96V @ 16mA
weight: 0.30g
diameter: 5mm
The brightest white LED in its price range

Single-cell lithium charger

Details 

Charge current = 10mA, 20mA or 30mA (selectable with jumpers).
Runs on 4 AA cells. Battery holder is included.
Charging times:
10mAh = 1 hour
20mAh = 1 hour
30mAh = 1 hour
50mAh = 1.7 hours
70mAh = 2.4 hours
100mAh = 3.4 hours
When charging a 2-cell battery, charging times are doubled.

switch, SPDT slide

Details 

weight = 0.20g
All Electronics Corp.

Telescoping antenna

Details 

154mm long collapsed, 880mm extended
An inexpensive source of nickel plated tubing of various diameters.
Each tube is 10cm long.

voltage monitor 3V

Details 

LED on: cell OK
LED off: charge cell
120mg
Designed by Leon Wolfe

voltage monitor 9V

Details 

LED off: battery OK
LED on: charge battery
270mg
Designed by Leon Wolfe